Factory guga elevator NE farantin sarkar sarkar mai sarrafa sarkar mai aikin hannu
Gabatarwar Samfur
The plate sarkar guga elevatorsabon samfur ne da aka haɓakatare dafasahar ci-gaba daga kasashen waje.Babban sigogi na fasaha sun dace da ka'idodin Ma'aikatar Injin (JB3926-85).Yana ɗaukar caji mai gudana da kai da fitarwar nauyizane.Sarkar ne mai ingancin gami da ƙarfe mai ƙarfi mai ƙarfi na farantin karfe, wanda yake da juriya kuma abin dogaro.Bangaren tuƙi yana ɗaukar mai rage girman haƙori.Wannan inji ya dace da kai tsaye na matsakaici, babba da kayan abrasive (kamar dutsen farar ƙasa, clinker siminti, gypsum, dunƙule kwal), kuma kayan zafin jiki yana ƙasa da 250 ℃.
Ana amfani da lif ɗin sarkar sarkar NE a ko'ina a ƙasashen masana'antu daban-daban.Saboda girman ingancinsa, nau'in HL da sauran na'urorin hawan sarkar ana cire su.Wannan jeri shine ciyarwa mai shigowa, kayan yana gudana cikin hopper kuma an ɗaga shi zuwa sama ta sarkar farantin, kuma yana sauke kanta ƙarƙashin aikin ƙarfin kayan.NE jerin farantin sarkar guga lif yana da 11 model: NE15, NE30, NE50, NE150, NE200, NE300, NE400, NE500, NE600, NE800.
Ƙa'idar Aiki
An raunata lif sarkar sarkar NE a kusa da sprocket na tuƙi na sama da ƙananan jujjuyawar sprocket ta sassa masu motsi.Ƙarƙashin aikin na'urar tuƙi, sprocket ɗin tuƙi yana tuƙi memba na gogayya da hopper don yin motsi madauwari, da kumaabuana ciyarwacikin hoppersdaga sashin ƙasa.Lokacin da aka ɗaga kayan zuwa sprocket na sama, ana fitar da shi daga tashar fitarwa a ƙarƙashin aikin nauyi da ƙarfin centrifugal.
Ana nuna manyan sigogi a cikin tebur da ke ƙasa.Na'urar tana ɗaukar cikakkiyar suturar da aka rufe tare da ƙarancin saurin sarkar kuma kusan babu wani abu na dawowar kayan abu, don haka asarar wutar lantarki ta yi ƙasa, ƙarar ƙararrawa ce, kuma rayuwar sabis ɗin tana da tsayi.
Babban sigogi na fasaha na NE plate sarkar guga lif
| abin koyi | Adadin ɗagawa (m³/h) | Material girma | ||||
|
|
| % | ||||
|
|
| 10 | 25 | 50 | 75 | 100 |
| NE15 | 16 | 65 | 50 | 40 | 30 | 25 |
| NE30 | 31 | 60 | 75 | 58 | 47 | 40 |
| NE50 | 60 | 90 | 75 | 58 | 47 | 40 |
| NE100 | 110 | 130 | 105 | 80 | 65 | 55 |
| NE150 | 165 | 130 | 105 | 80 | 65 | 70 |
| NE200 | 220 | 170 | 135 | 100 | 85 | 70 |
| NE300 | 320 | 170 | 135 | 100 | 85 | 70 |
| NE400 | 441 | 205 | 165 | 125 | 105 | 90 |
| NE500 | 470 | 240 | 190 | 145 | 120 | 100 |
| NE600 | 600 | 240 | 190 | 145 | 120 | 100 |
| NE800 | 800 | 275 | 220 | 165 | 135 | 110 |
Babban Tsarin Ne Plate Chain Bucket Elevator
Halayen Tsarin Tsarin Babban Bangaren
1. Na'urar babba: shigar da waƙas(layi biyu) don hana sarkar juyawa, tsayawa baya don hana hopper daga juyawa.baya kumatoshe kayaningƙananan casing, kuma tashar fitarwa tana sanye da farantin roba don hana kayan daga dawowa.
2. Matsakaici: Wasu sassa na tsaka-tsaki an sanye su da waƙoƙi (sashe biyu na layi) don hana sarkar girgiza yayin aiki, wasu sassan tsaka-tsakin kuma an sanye su da kofofin shiga don kulawa.
3. Ƙananan na'ura: shigar da na'ura mai tayar da hankali, NE15 ~ NE50 yana ɗaukar tashin hankali na bazara, NE100 ~ NE800 yana ɗaukar nauyin akwati mai nauyi.
4. Na sama da ƙananan sprockets sun ɗaukaabin koyiSaukewa: ZG310-570.Overall quenching da tempering, HB229-269 hakori surface quenching HRC40 ~ 48.
5. Sarkar farantin karfe: farantin sarkar ta daukoabin koyi45 # HRC36~42
Cikakken Cikakkun Abubuwan Bucket Bucket Bucket Ne Plate:
Akwai nau'ikan sarƙar sarƙar farantin NE guda 11, waɗanda sune NE15, ne30, ne50, ne100 zuwa ne800.Kafin shigar da nau'in NE na sarkar farantin hoist, duba ko jujjuyawar haɗin gwiwa tana da sassauƙa.Idan yana da wahala a jujjuya shi, sai a cire shi, a lalata shi da man fetur ko kananzir.sannan a goge shi da takarda yashi har sai ya iya jujjuyawa a hankali kafin shigarwa.An haramta man shafawa sosai.
NE farantin sarkar guga lif: hopper, reducer, sarkar, kaya
Siffofin Manyan Abubuwan Abubuwan Tafiyar Bucket Bucket Ne Plate Chain
1. Faɗin aikace-aikace.Akwai 'yan buƙatu don nau'in, halaye da toshe kayan.Ana iya amfani da shi don ɗagawajanar foda, granular da block kayan,har dakayan aikitare da niƙa halaye.Yanayin zafin jikiiya zamahar zuwa 250 ° C.
2. Ƙarfin tuƙi kaɗan ne.Injin yana ɗaukar ciyarwar mai shigowa, fitarwa mai ƙarfi, kuma yana ɗaukar babban mashigin iya aiki don isarwa.Gudun sarkar yana da ƙasa kuma adadin ɗagawa yana da girma.Akwai kusan babu kayan dawowa da digging, don haka daba -Ƙarfin samarwa kaɗan ne, kuma yawan wutar lantarki shine 70% nanahawan sarkar.
3. Babban ƙarfin isarwa.Ana samun jerin a cikin masu girma dabam 11.Matsayin ɗagawa 15 ~ 800m 3 /h.
4. Rayuwa mai tsawo.Zane na wannan na'ura yana tabbatar da cewa kayan ba za su warwatse ba yayin ciyarwa, ɗagawa da saukewa, wanda ke rage lalacewa na inji, kuma da wuya matsi da karo tsakanin kayan.Sarkar isar da saƙon tana ɗaukar sarkar ƙarfi mai jure lalacewa, wanda ke tsawaita rayuwar sarkar da guga ta sarkar sosai.A karkashin amfani na yau da kullun, rayuwar sabis na sarkar jigilar kaya ta wuce shekaru 5.
5. Kyau mai kyaukumakasa gurbacewar muhalli.Ƙa'idar ƙira ta ci gaba tana tabbatar da amincin duk injin ɗin, kuma lokacin da ba shi da matsala ya wuce sa'o'i 30,000.
6. Saɓanin na'ura kaɗan ne kumakiyayewa da gyara sun dace.Kudin amfani shinesosaiƙananan saboda tanadin makamashi da ƙarancin kulawa.
7. Girman injin yana karamida kumabayyanar yana da kyau, tare da folded & weldedcasingda embossedtsakiya&mai kyau rigidity.
Shigar da sarkar NE plate lif
1. Dole ne a shigar da lif na sarkar farantin guga da ƙarfi a kan tushe mai ƙarfi.Fuskar tushe na kankare ya kamata ya zama lebur da kwance don tabbatarwaa tsaye na injibayan shigarwa.
Gilashin sarkar farantin guga mai tsayi mai tsayi yakamata a haɗa shi tare da gine-ginen da ke kusa da shi (kamar silo, wuraren bita, da sauransu) a wuraren da suka dace na casing na tsakiya da na sama don ƙara kwanciyar hankali.Lokacin da ake shigarwa, fara shigar da ƙananan sassa, gyara bolts na anga, sannan shigar da akwati na tsakiya, sannan shigar da babban akwati.Bayan the shigarwa, gyara datsaye.Auna tare da layin plumb sama da ƙasa cikakken tsayi, kuma kuskuren ya kamata ya zama ƙasa da 10mm.Ya kamata na sama da na ƙasa su kasance a layi daya, kuma layin axis ɗin su kasance cikin jirgi ɗaya.
Lokacin shigar da lif ɗin bokiti tare da ƙananan tsayi, ana iya haɗa manyan casings na sama, na tsakiya da na ƙasa kuma a daidaita su a kan jirgin ƙasa, sa'an nan kuma an ɗaga gaba ɗaya kuma an gyara shi a kan tushe na kankare.
2. Bayan an shigar da casing, shigar da sarkar da hopper.Siffar U-dimbin yawa da aka yi amfani da ita don haɗin haɗin hopper ba kawai haɗin gwiwa ba ne, amma har ma wani ɓangaren gyarawa na hopper.Dole ne a danne goro na dunƙule mai siffa U-dagaskiyatohanatsassautawa.
3. Bayan an shigar da sarkar da hopper, daidaita shi da kyau.
4. Ƙara adadin mai da man shanu mai dacewa ga mai ragewa da wurin zama bi da bi.Ana shafawa mai ragewa da man kayan aikin masana'antu.Ana iya amfani da man shanu na tushen Calcium ko na tushen sodium a cikin gidaje masu ɗaukar nauyi.
5. Aikin gwaji.Bayan an gama shigarwa, ya kamata a gudanar da aikin gwaji na abin hawa.Ya kamata a mai da hankali ga aikin rashin aiki: ba za a iya jujjuya shi ko ci karo da shi ba.Bayanaiki mara amfanina a'akasa da sa'o'i 2, kada a yi zafi fiye da kima, yawan zafin jiki bai kamata ya wuce 250C ba, kuma yawan zafin jiki na ragewa bai kamata ya wuce 300C ba.Bayan sa'o'i 2 na aiki mara kyau, za'a iya yin gwajin gwaji lokacin da komai ya kasance na al'ada.A lokacin gwajin gwaji tare da kaya, ciyarwar ya kamata ya kasance daidai don hana cin abinci mai yawa da kuma toshe ƙananan ɓangaren kuma haifar da "mota mai kayatarwa".
Kulawa na yau da kullun
Gyaran dabaran kai da wutsiya
Gyara daidaitattun ƙafar kai da ƙafar wutsiya kowane wata shida.
1. Yi amfani da igiyar da ba ta da ƙarfi don rataya ƙwallon a tsaye daga kai zuwa wutsiya.Da farko, gyara tsakiyar layin hoist, da kuma ƙetare a kwance da na tsaye nainji: karkacewar ya kamatabai wuce 5mm ba lokacin da tsayin lif ɗin guga ya kai mita 10-20, lokacin da tsayin lif ɗin guga ya wuce 20m, bai wuce 7mm ba;
2. Daidaitawar madaidaicin ƙafar ƙafar ƙafa zuwa jirgin sama na kwance bai wuce 0.3% ba, kuma wutsiya na wutsiya yana daidai da kai;
3. Matsakaici na tsaye na tsakiya na kaidabarankumadadabaran wutsiya: Ya kamata karkacewar ta kasance a'afiye da 3 mm, lokacin datsawoof lif guga shine 10-20m, da kumadiamita ya kamata ba fiye da 5 mm.lokacin da tsawonahawan guga ya fi 20m;
4. Juyin jirgin sama na kaidabarankumadadabaran wutsiya.Ya kamata karkacewar ta kasance a'afiye da 4mm lokacin da tsayin lif ɗin guga ya kai mita 10-20, kuma bai wuce 6mm ba lokacin da tsayin lif ɗin guga ya wuce 20m.
Pfasahas
1. Dabarun wutsiya:Ya kamata a tsaftace kayan da aka tara a ƙarƙashin farantin tallafi na counterweight a cikin dabaran wutsiya a cikin lokaci don hana farantin tallafi daga makale da kuma tabbatar da sassaucin motsin wutsiya.
Lura: Katange farantin tallafi zai haifar da rashin daidaituwa na lalacewafarantin karfesarkar akanbiyubangarorin ko lalata hopper.
2. Theakwati: The casing,musamman kofar dubawa, yakamata a rufe cikin lokaci don hana danshi shiga.
Lura: Danshi mai shiga daga hawan guga zai taso akan bangon bucket na daga harsashi don samar da manyan dunkulallun abu, wanda zai toshe budewa daga hawan guga ko tsinke bayan fadowa.
3. Sarƙoƙi da hoppers:Bincika sarƙoƙi akai-akai, jagororin sarkar, fil, da bolts, kari ko zame su, kuma yanke sarkar.sassabisa ga lalacewayanayi.
4. Gidaje masu ɗaukar nauyi:Bincika kusoshi na wurin zama kowane motsi kuma ɗaure su cikin lokaci.Tsaftace kura da tabon mai akan mai rage sau ɗaya a rana, gabaɗaya shafa da zane.
