Haɗin tashar ciyarwa don ton bales
Ƙa'idar Aiki
Injin cire kayan ton bale yana kunshe da firam, hopper mai cire kaya, injin lantarki, mai tara ƙura, bawul ɗin ciyar da rotary (an saita wannan bawul ɗin bisa ga buƙatun tsarin na gaba), da sauransu.
Ana gyara hawan wutar lantarki a kan katako na firam na sama, kuma ana iya daidaita shi a ƙasa;
Ton bale na hawan wutar lantarki yana ɗaga saman hopper, bakin jakar ya miƙe zuwa mashigar hopper, sannan a rufe bag ɗin bag ɗin sosai, a kwance igiyar jakar jakar, sannan a ɗaure bag ɗin bag ɗin. a hankali buɗewa, kuma kayan da ke cikin jakar suna gudana cikin hopper a hankali;Ana fitar da kayan ta hanyar hopper zuwa bawul ɗin rotary a ƙananan ɓangaren, kuma ya shiga cikin bututun ƙasa.Gas ɗin da aka matsa daga masana'anta zai iya jigilar kayan zuwa wurin da aka nufa don kammala aikin kwashewa da sufuri (idan ba a buƙatar sufuri, ana iya barin wannan bawul).Don kayan foda mai kyau, ana iya gina wannan saitin kayan aiki a ciki ko kuma a haɗa shi a waje da mai tara ƙura (duba hoton da ke sama), don tace ƙurar da aka samu yayin aikin zubar da ruwa, da kuma fitar da iskar gas mai tsabta a cikin yanayi. , ta yadda ma’aikata za su iya yin aiki cikin sauki a yanayi mai tsafta.Idan kayan granular mai tsabta ne tare da ƙarancin ƙura, shigar da nau'in tacewa na polyester a tashar shaye-shaye zai iya cimma manufar cire ƙura ba tare da mai tara ƙura ba;
Ana iya sarrafa tsayin gabaɗaya tsakanin mita 2-5 don saduwa da buƙatun tsayin bene;idan an saita hawan wutar lantarki a kan firam, bene na sama ba zai buƙaci ɗaukar wannan nauyin ba;an gyara kasan na'ura mai kwancewa tare da ƙusoshin anga, kuma ba a buƙatar sassan da aka riga aka shigar;Don kwance kayan aiki sama da 5 m, ana buƙatar sassan da aka riga aka shigar don ƙara ƙarfinsa) Lokacin da injinan buɗewa da yawa, ana iya sanya su gefe da gefe, wanda ya dace da gudanarwa na tsakiya da tsarin masana'anta.
Siffofin
● Na'urar cirewa tana da tsari mai sauƙi kuma yana da sauƙin aiki;
● Abokai ga mahalli da ma'aikaci;
● Haɗaɗɗen ƙira na kwancewa, mari, murƙushewa, rabuwar maganadisu, awo da isarwa,.Tsarin tsari da sauƙi aiki;
(na zaɓi)
● Rufewar buɗewa, hana ƙura daga tashi, inganta yanayin aiki da rage farashin samarwa;
● Abubuwan da ake amfani da su: foda, pellets, cakuda foda, ƙananan flakes, da dai sauransu.
● Masana'antu masu dacewa: abinci, magani, sinadarai na yau da kullum, masana'antun sinadarai;nau'in abu: foda, da dai sauransu.
Za'a iya haɗa kanti na kayan aiki zuwa: bawul ɗin saukewa na juyawa, bawul ɗin diski, bawul ɗin flapper, mai ciyar da injin ciyarwa, jigilar bututu, isar da bututun bututu, tashar ciyarwa ta hannu, kayan aikin ƙididdigewa, hopper, silo, tsarin isar da pneumatic da sauransu.
Yadda ake amfani da injin kwancen tan bale
1. Yi amfani da injin hannu ko lantarki don ɗaga bales ɗin ton waɗanda ke buƙatar sarrafa su kuma sanya su a cikin wani wuri da za a iya sarrafa su yadda ya kamata;
2. An buɗe bawul ɗin injiniya a cikin jakar jaka, kuma an ɗaga jakar jakar kai tsaye;
3. Danna ƙasa farantin murƙushe jakar, kuma bayan an matsa bakin jakar, ƙurar ba za ta zubo ba;
4. Idan kayan da ke cikin ton bale ne kawai 1/3 a lokacin aiki, dole ne a bude bawul mai sarrafawa a kan na'urar bugun jini a cikin lokaci, tura kayan da ke kusa da ton bale zuwa matsayi na tsakiya don tabbatar da cewa kayan ya shiga cikin hopper ciyar. da kuma cewa babu sauran kayan aiki a cikin ton bale;
5. Bayan an sauke duka jakar kayan, da farko, wajibi ne a ƙara ƙarfin tashar jiragen ruwa, sa'an nan kuma amfani da jakar jakar don tayar da farantin karfe a hankali, kuma kai tsaye cire ton bale.Ainihin tsarin aiki yana da sauƙi kuma mai dacewa.
