ultrasonic High Frequency Rotary Vibrating Screen Sieve
Ƙa'idar aiki
Ultrasonic high-frequency vibrating allon kuma ana kiransa babban allon tacewa, wanda ake magana da shi a matsayin babban allo.Kayan aiki ne mai tasiri don tantancewa da ƙididdige kayan ƙira mai kyau.ko ayyuka masu daraja.Daban-daban da allon girgiza na yau da kullun, babban allo mai girgiza motsi yana ɗaukar injin girgiza mai jujjuyawa mai hawa biyu, kuma saurin injin girgiza shine 3000r/min.A tashin hankali da kuma high-gudun oscillation na lafiya-grained kayan a kan allon surface, a daya hannun, ƙara da yiwuwar cewa kayan karami fiye da rabuwa barbashi size za su tuntube da allon frame, wanda shi ne conducive zuwa rabuwa da stratification na. da kyau da nauyi kayan da kuma hanzarta sieving na lafiya da nauyi kayan.
Ultrasonic high-frequency vibrating allon ana amfani da shi don allon glaze da sauran ruwa mai ɗorewa, ta yin amfani da motar motsa jiki mai girma, da kuma sanye take da firam ɗin malam buɗe ido, tsayin da za a iya daidaita shi gwargwadon wurin aikin ku da tsayin layin samarwa.
Amfanin samfur
● High mita, low amplitude, vibration mita har zuwa 3000 sau / min, iya yadda ya kamata rage surface tashin hankali na ɓangaren litattafan almara, sauƙaƙe da rabuwa da stratification na lafiya da nauyi kayan, da kuma hanzarta nassi na lafiya da nauyi kayan ta hanyar allon.
● Yin amfani da ragamar allo mai lanƙwasa, buɗaɗɗen buɗe ido guda ɗaya yana ƙaruwa, rayuwar allo tana ƙaruwa, da hana hana rufewa da lalacewa.
● Yana iya yadda ya kamata magance m gauraye kayan da sauri gane m-ruwa rabuwa, da fitarwa ne 2-5 sau na talakawa vibrating fuska.
● Rubber spring support frame frame, vibration ware da kuma sauti sha, low amo, kananan kayan lodi, babu bukatar kankare tushe.
● Ƙaƙƙarfan ƙira na firam na sama na iya hana slurry saman tsalle yayin aikin tacewa.
● Za'a iya shigar da firam mai motsi, wanda za'a iya motsa shi da yardar kaina a wurin aiki, tsayin daka yana daidaitawa, shigarwa ba shi da rikitarwa, aikin yana da sauƙi, kuma ba shi da sauƙi don lalacewa.
● Tsarin allo na musamman yana tsawaita rayuwar sabis ta sau 2 zuwa 3, kuma yana dacewa da sauƙi don canza allon, kuma yana ɗaukar mintuna 3-5 kawai don maye gurbin sau ɗaya.
Ma'aunin fasaha
| Samfura | Diamita na firam (mm) | Diamita na allo (mm) | Kan allo | Layer | mita | iko |
| Saukewa: CF-GPS-600 | 600 | 550 | 2-800 | 1 | 3000 | 0.55 |
| Saukewa: CF-GPS-800 | 800 | 760 | 2-800 | 1 | 3000 | 0.75 |
| Saukewa: CF-GPS-1000 | 1000 | 950 | 2-800 | 1 | 3000 | 1.1 |
| Saukewa: CF-GPS-1200 | 1200 | 1150 | 2-800 | 1 | 3000 | 1.5 |
Bayanin samfur
Kewayon aikace-aikace
High-mita vibrating allo ne yafi amfani a m-ruwa nunawa da tacewa a cikin yumbu masana'antu (slurry, glaze), Paint masana'antu, shafi masana'antu, da sauran masana'antu, musamman a cikin yumbu masana'antu, da nunawa da tacewa sakamako na glaze ne sosai. mai kyau.Babban allon mita mai tsayi tare da diamita na 600 da allon raga 120 na iya tace ton 2-3 na glaze a cikin awa ɗaya.
Bayanan kula game da babban mita
1. Mitar: Mitar girgiza na babban allo mai jijjiga yana kusan 50HZ.Daidai ne saboda wannan girgizawar mita mai girma cewa za'a iya raba kayan da sauri, wanda ya dace da kayan aiki tare da babban slurry maida hankali.
2. Angle: kusurwar shigarwa na na'ura na allon yana dacewa da daidaitacce, kuma kusurwar shigarwa na nunin rigar a cikin mai tattarawa shine gabaɗaya 25 ± 2 °.
Babban gyare-gyaren allo
1. Sake skru na zoben ƙulla, kuma cire firam na sama da firam ɗin raga.
2. Sanya firam ɗin raga a kan dandali ɗaya sannan a sanya shi a hankali, cire ragamar firam ɗin robar, sassauta na'urori na sama da na ƙasa, sannan cire allon da ya lalace.
3. Yanke allon tare da ragamar da ake buƙata, kuma girman allon yakamata ya zama 10 cm mafi girma fiye da diamita na waje na babban ɓangaren raga (mafi girma fiye da tsayin firam ɗin raga)
4. Sanya allon da aka yanke akan firam ɗin raga, kuma nisa daga kowane gefe zuwa firam ɗin raga yana da ma.
5. Da farko shigar da ƙananan ragar firam ɗin matsewa da farko, ƙara ɗanɗana shi, ja gefen ragamar allon don sanya ragar a ko'ina a kan firam ɗin raga, kuma tabbatar da cewa dukkan bangarorin sun matse gaba ɗaya ta hanyar matsewa, sannan kuma gabaɗaya.Danna shi da yatsunsu, allon ya kamata ya sami ɗan tashin hankali, idan ya yi sako-sako da yawa, ya kamata a sake shigar da shi sau ɗaya.
6. Shigar da babban grid tensioner.Ya kamata a shirya screws masu tayar da hankali a cikin siffar giciye tare da dunƙule na farko mai tayar da hankali kuma a ɗaure gaba ɗaya.
7. Yanke allon wuce haddi tare da gefen ragar raga, kuma sanya tef ɗin hatimi akan firam ɗin raga.
8. Sanya firam ɗin raga da aka maye gurbinsu a daidai matsayin na'urar allo, nisa tsakanin kowane gefe yakamata ya zama iri ɗaya, ɗaure firam na sama, kuma ƙara ƙarar zobe.
Lura: Don shigar da grid tensioner, ya kamata a fara shigar da ƙananan, sannan a shigar da na sama.Ba za a iya juya oda ba, kuma ba za a iya shigar da masu tayar da hankali na sama da na ƙasa a lokaci guda ba.Bugu da ƙari, kula da aminci, kada ku bari gefen waya na allon ya yanke yatsun ku.
