The ultrasonic generator can also become an ultrasonic power supply. The function of the ultrasonic generator is to provide stable and intelligent high-frequency power for the ultrasonic transducer, and to control the power output mode and the current intensity output intensity so as to achieve different ultrasonic modes and energy output requirements . Trendfull ultrasonic generator a total of three modes: pulse, gap, continuous. Power output intensity of three modes: High-end、Mid-end、Low-end.
Ultrasonic transducers are functional modules that convert electrical energy supplied by an ultrasonic generator (power source) into mechanical vibrational energy.
Ultrasonic system is a high-tech system that converts electrical energy into high-frequency vibration mechanical energy. This system successfully solves the difficult problems of material blocking and low screening efficiency encountered in the screening field, and is widely used in various powder equipment. superior. After a lot of tests and improvements, the matching of the ultrasonic generator and the transducer has reached an optimized state, which effectively solves the problem of the transducer heating, and can maintain a strong vibration energy output.
Ultrasound system consists of ultrasonic generator, ultrasonic transducer and connecting cable, and realize the conversion of electric energy to mechanical vibration energy. The energy conversion efficiency of the ultrasonic system depends on the matching between the ultrasonic generator and the transducer. For example, the trendfull ultrasonic generator reaches the international advanced level.
link cable -- a cable link is used between the ultrasonic transducer and the power supply of the ultrasonic vibrating screen.
Connector -- Aviation link plug-in.
Transducer - high performance ultrasonic conversion device.
Ultrasonic grid frame - composed of external grid frame and resonator.
Screen -- suitable for 10 mesh to 800 mesh.
●Prepare 220V, 2A power outlet;
●The ultrasonic generator placed on the platform above the ground;
●The rotary vibrating screen ultrasonic transducer installed on the horn end face inspection, if you find that stains or uneven, use a soft cleaning cloth to clean the end face;
● Check the ultrasonic transducer screw link face, if you find that stains or uneven, use a soft cleaning cloth to clean the end face;
●Assemble the sonotrode with the shaker sonotrode (using a standard M8 screw) and tighten the transducer fully with a wrench. Otherwise it will loosen and damage the equipment during the work;
●Links ultrasonic transducer and ultrasonic generator, link the attention of the connector direction, can not be inserted in forcibly inserted, check the connector positioning groove alignment;
● Turn on the power of the ultrasonic generator, press the POWER button on the ultrasonic generator control panel, ultrasonic start. Carefully observe the screen after starting, you can use a small amount of material to observe the test to determine whether the ultrasonic effect is achieved.
Model |
Rated voltage |
Output frequency |
Output Power |
Working humidity |
Dimensions |
CF-35DP |
220V |
30±1Khz |
30W-90W |
0-90% |
295*210*147mm |