Pharmaceutical mixer machine W Shape Rotary Double Cone Powder Mixer dry powder mixing equipment

Short Description:

Introduction

)ur W model double cone powder mixer with similar functions to those of V type mixer, this machine is applicable for pharmaceutical, chemical, foodstuff, feed, dyestuff and electronic trades etc.

Double cone mixer has remarkable effect in mixing powders and particles with relatively good fluidity. With the each Index reaching the standard of same kind of foreign product, it’s barrel is made of stainless steel, which is polished both inside and outside, featuring beautiful appeatance and easy operation.

Features:

The machine has the features of the special construction, high effect, no dead angle, uniform mixture. The machine can also increase to blend the function compulsorily. It can mix thin powder and more than two form powders including the materials that contain water. It can get the good result of admixture (meaning that little admixture additives).

Selection Points:

a.Full capacity of equipment: 50L~10000L;

b.Mixed volume ratio of equipment: > 60% full load rate;

c.The mixing time used can be set;

d.Drive configuration power 1.5KW-55KW;

e.Equipment materials can be 316L, 321, 304, carbon steel, and lining, etc.;

Send email to us

Working principle

Product advantages

Technical parameters

Product Details

Operation precautions

Application range

Maintenance and Upkeep

Working principle

Double cone mixer by double cone cylinder, mechanical seal, frame, deceleration transmission, etc., rotating double cone cylinder so that the material in the cylinder body produces disorder rolling mixing, so that the material in the cylinder body quickly mixed, mixing barrel can be arbitrarily tilted angle, easy to discharge and cleaning needs.

1. Let heat source (for example, low pressure steam or heat conduct oil) pass through the sealed jacket. The heat will be transmitted to raw material to be dried through inner shell;

2. Under driving of power, the tank is rotated slowly and the raw material inside it is mixed continuously. The purpose of reinforced drying can e realizd;

3. The raw material exists at the state of vacuum. The drop of team pressure makes the moisture (solvent) at the surface of raw material become saturation and will evaporate. The solvent will be discharged through vacuum pump an drecovered in time. The inner moisture (solvent) of raw material will infiltrate, evaporate and discharge continuously. The three processes are carried out unceasingly and the purpose of drying can be realized within a short time.

Product advantages

W model double cone powder mixer is most often used for the intimate dry mixing of free flowing solids. The materials are fed into the mixing barrel via quick-open feed port manually or by vacuum feeder. With the rotation of mixing barrel, materials can be completely mixed with high degree of homogeneity. Normal cycle times are typically in the range of 10 minutes, however they can be less depending on the difficulty of mixing.

Technical parameters

Model	Full volume of mixing drum（L）	Loading coefficient	Motor power（kw）	Overall dimension (length × Wide × High)(mm)	Machine weight(Kg)
CF-W-2	2	40%-60%	0.09	500×200×300	40
CF-W-5	5		0.2	650×250×450	60
CF-W-10	10		0.37	800×300×600	100
CF-W-20	20		0.55	980×400×850	180
CF-W-50	50		0.75	1350×500×1100	380
CF-W-100	100		1.1	1580×650×1350	550
CF-W-200	200		1.5	1800×750×1650	680
CF-W -300	300		2.2	2050×850×1850	800
CF-W -400	400		3	2300×950×1850	1000
CF-W -500	500		4	2400×1050×2100	1200
CF-W -800	800		5.5	2500×1200×2300	1400
CF-W -1000	1000		5.5	2800×1500×2500	1800
CF-W -2000	2000		7.5	3400×1600×2700	2100
CF-W-3000	3000		11	3500×1680×2900	2400
CF-W -4000	4000		15	3600×1800×3100	2600
CF-W-5000	5000		22	3900×1900×3300	2800
CF-W -6000	6000		30	4100×2000×3500	3000
CF-W-8000	8000		37	4300×2200×3700	4000

Product Details

Operation precautions

1.Mixing material by rotating hopper,good mixing effect in short time
2.Stainless steel material, meet GMP standard, durable and strong
3.Simple structure, polished surface, easy to maintain and clean
4.Air tight on discharging and feeding hole
5.Adjustable rotating speed, digital display
6.Customized design to meet special need

1) Deflector inside to make better mixing effect.

2) Safety guardrail on side.
3) Adjust or display the turning speed and direction.
4) Can be changed into vacuum drying machine.

Application range

It is suitable for the raw materials that need to concentrate, mix and dry at low temperature (for example, biochemistry products in chemical, pharmaceutical and foodstuff industries. Particularly it is suitable for the raw materials that are easy to oxidize, volatilize and have strong heat sensitive and toxic and not permitted to destroy its crystal in drying.

Maintenance and Upkeep

1. The equipment maintenance needs to have professionals, professionals need to hold the relevant nationally recognized operation certificate, and the maintenance personnel need to go through the maintenance training of the supplier.

2. In principle, it is not allowed to change the structure of the equipment during the maintenance process, and if it is necessary to change, it must communicate with the supplier and obtain authorization.

3. If the parts are damaged, the accessories of the same brand and model need to be replaced, such as the equipment damage and other problems caused by the replacement of different brands and models of accessories, the supplier will not be liable.

4. Users need to formulate relevant operation and maintenance procedures to ensure the long-term stability of equipment use. Maintenance personnel should carry out regular or irregular maintenance according to the requirements of the regulations. And the maintenance personnel should be relatively fixed to achieve the best working state of human and machine combination.

5. The reducer is refueled regularly, and the oil level should be high to the center of the oil mark.

6. After the reducer is carried for the first 150 hours, the lubricating oil must be replaced for the first time. Residual oil should be removed during replacement. Replace every 6 months thereafter.

7. The bearing is filled with grease, and it is checked and replenished every 6 months.

8. Regularly check and adjust the tightness of the chain and triangle belt; and apply mechanical oil to the chain.

Previous: Small multi-layer fine material sieving equipment Standard soil test sieve

Next: Horizontal stainless steel ribbon mixer with Industrial Heated for Powder

Write your message here and send it to us