CF-QZKS Series Automatic Vacuum Powder Feeding Machine is the use of compressed air to produce a high vacuum by the vacuum generator to achieve the delivery of materials,
It doesn’t need the mechanical vacuum pump. It has the feature of simple structure, small size, maintenance-free, low noise, easy to control, eliminate static electricity and materials in line with GMP requirements and so on.
Vacuum generator produce the high vacuum, which avoid the material being conveyed to be stratified, to ensure the uniformity of mixed materials ingredients. It’s the best choice for mechanical automatic feeding of tablet press machine, capsule filling machine, dry granulation machine, packing machine, pulverizer, vibration sifter.
When the compressed air is supplied to the vacuum generator, vacuum generator to generate a negative pressure air stream to form a vacuum, the material is sucked into the suction nozzle to form a gas stream through the suction tube reaches the silo on the feeder.
The air filter materials and complete separation, when the material hopper is full, the controller will automatically cut off the gas supply, the vacuum generator stops working, while the chamber door open automatically, the material falls into the hopper of the machine. At the same time, the self-cleaning filter by compressed air pulse cleaning valve. Wait until the time when the material level sensor sends a signal feeding automatically start the feeder.
When the compressed air is supplied to the vacuum generator, the vacuum generator generates negative pressure to form a direct air flow. The material is sucked into the suction pipe forming material-air, which goes through the suction pipe and reaches the material bin of the first feeder. The filter completely separates the material from the air. When the material bin is full, the controller will automatically cut off the air source, the vacuum generator stops working, the bin door opens automatically, and the material falls into the hopper of the equipment. At the same time, the compressed air automatically cleans the filter through the pulse back blowing valve. When the time is up or the material level sensor sends the feeding signal, the feeding machine will be started automatically.
● Dust free transfer of bulk materials: Negative pressure inside the conveying system and two-stage filter can create dust free condition
● Easy to clean: The conveying system can be easily dismantled for cleaning
● Small foot print: The conveying soft tube takes up little or no floor space within your facility
● Easy to install: The conveying system is connected by quick-open clamps which makes the installation very easy
● GMP standatrd: The system is made by stainless steel and mirror polished. No dead corners for cleaning.
● Low noise and power consumption: Noise in operation is less than 60 dB.
Model |
Gas consumption: M³ / min |
bleed pressure Mpa |
Conveying capacity (kg/h) Based on flour as the work mat. |
Overall dimension (mm) |
Feeding height (M) |
CF-QZKS-190 |
0.28 |
0.5-0.8 |
100kg-300kg |
φ190*800 |
1-5M |
CF-QZKS-220 |
0.46 |
0.5-0.8 |
200kg-500kg |
φ220*870 |
1-5M |
CF-QZKS-290 |
1.29 |
0.5-0.8 |
500kg-1000kg |
φ290*980 |
1-5M |
CF-QZKS-420 |
2.7 |
0.5-0.8 |
1000kg-2000kg |
φ420*1420 |
1-5M |
CF-QZKS-600 |
3.8 |
0.5-0.8 |
1000kg-3000kg |
φ600*1960 |
1-5M |
Medicine, food, chemical industry, metallurgy, building materials and other industries.
Applicable Materials
Various powder materials. It’s mainly used for conveying powder and granular materials in food, pharmaceutical, chemical and other industries, especially suitable for flammable materials and explosion-proof workshops.